<TITLE>setpgid</TITLE> <body bgcolor="#ffffcc"> <hr> <pre> <h3>SETPGID(2) Linux Programmer's Manual SETPGID(2) </h3> <h3>NAME </h3> setpgid, getpgid, setpgrp, getpgrp - set/get process group <h3>SYNOPSIS </h3> #include <unistd.h> int setpgid(pid_t pid, pid_t pgid); pid_t getpgid(pid_t pid); int setpgrp(void); pid_t getpgrp(void); <h3>DESCRIPTION </h3> setpgid sets the process group ID of the process specified by pid to pgid. If pid is zero, the process ID of the current process is used. If pgid is zero, the process ID of the process specified by pid is used. getpgid returns the process group ID of the process speci- fied by pid. If pid is zero, the process ID of the cur- rent process is used. In the Linux DLL 4.4.1 library, setpgrp simply calls setpgid(0,0). getpgrp is equivalent to getpgid(0). Process groups are used for distribution of signals, and by terminals to arbitrate requests for their input: pro- cesses that have the same process group as the terminal are foreground and may read, while others will block with a signal if they attempt to read. These calls are thus used by programs such as csh(1) to create process groups in implementing job control. The TIOCGPGRP and TIOCSPGRP calls described in termios(4) are used to get/set the process group of the control terminal. <h3>RETURN VALUE </h3> On success, setpgid and setpgrp return zero. On error, -1 is returned, and errno is set appropriately. getpgid returns a process group on success. On error, -1 is returned, and errno is set appropriately. getpgrp always returns the current process group. <h3>ERRORS </h3> EINVAL pgid is less than 0. EPERM Various permission violations. ESRCH pid does not match any process. <h3>Linux 1.2.4 15 April 1995 1 </h3> <h3>SETPGID(2) Linux Programmer's Manual SETPGID(2) </h3> </pre> <hr> <h3>SEE ALSO </h3><p> <a href=getuid.htm>getuid</a>, <a href=setsid.htm>setsid</a>, <a href=tcsetpgrp.htm>tcsetpgrp</a>, <a href=termios+4>termios</a>, <pre> <h3>Linux 1.2.4 15 April 1995 2 </h3> </pre> <P> <hr> <p> <center> <table border=2 width=80%> <tr align=center> <td width=25%> <a href=../index.htm>Top</a> </td><td width=25%> <a href=../master_index.html>Master Index</a> </td><td width=25%> <a href=../SYNTAX/keywords.html>Keywords</a> </td><td width=25%> <a href=../FUNCTIONS/index.htm>Functions</a> </td> </tr> </table> </center> <p> <hr> This manual page was brought to you by <i>mjl_man V-2.0</i>
file: /Techref/language/ccpp/Cref/MAN/setpgid.htm, 2KB, , updated: 2003/3/20 10:39, local time: 2024/8/22 23:17,
3.14.254.54:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/tecHREF/language/ccpp/Cref/MAN/setpgid.htm"> setpgid</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
The Backwoods Guide to Computer Lingo |
.