<TITLE>stat</TITLE> <body bgcolor="#ffffcc"> <hr> <pre> <h3>STAT(2) Linux Programmer's Manual STAT(2) </h3> <h3>NAME </h3> stat, fstat, lstat - get file status <h3>SYNOPSIS </h3> #include <sys/stat.h> #include <unistd.h> int stat(const char *file_name, struct stat *buf); int fstat(int filedes, struct stat *buf); int lstat(const char *file_name, struct stat *buf); <h3>DESCRIPTION </h3> These functions return information about the specified file. You do not need any access rights to the file to get this information but you need search rights to all directories named in the path leading to the file. stat stats the file pointed to by file_name and fills in buf. lstat is identical to stat, only the link itself is stated, not the file that is obtained by tracing the links. fstat is identical to stat, only the open file pointed to by filedes (as returned by fopen(3) ) is stated in place of file_name. They all return a stat structure, which is declared as follows: struct stat { dev_t st_dev; /* device */ ino_t st_ino; /* inode */ umode_t st_mode; /* protection */ nlink_t st_nlink; /* number of hard links */ uid_t st_uid; /* user ID of owner */ gid_t st_gid; /* group ID of owner */ dev_t st_rdev; /* device type (if inode device) */ off_t st_size; /* total size, in bytes */ unsigned long st_blksize; /* blocksize for filesystem I/O */ unsigned long st_blocks; /* number of blocks allocated */ time_t st_atime; /* time of last access */ time_t st_mtime; /* time of last modification */ time_t st_ctime; /* time of last change */ }; Note that st_blocks may not always be in terms of blocks of size st_blksize, and that st_blksize may instead pro- vide a notion of the "preferred" blocksize for efficient file system I/O. <h3>Linux 1.1.75 1 January 1995 1 </h3> <h3>STAT(2) Linux Programmer's Manual STAT(2) </h3> Not all of the Linux filesystems implement all of the time fields. Traditionally, st_atime is changed by mknod(2), utime(2), read(2), write(2), and truncate(2). Traditionally, st_mtime is changed by mknod(2), utime(2), and write(2). The st_mtime is not changed for changes in owner, group, hard link count, or mode. Traditionally, st_ctime is changed by writing or by set- ting inode information (i.e., owner, group, link count, mode, etc.). The following macros are defined to check the file type: S_ISLNK(m) is it a symbolic link S_ISREG(m) regular file S_ISDIR(m) directory S_ISCHR(m) character device S_ISBLK(m) block device S_ISFIFO(m) fifo S_ISSOCK(m) socket The following flags are defined for the st_mode field: S_IFMT 00170000 bitmask for the file type bit- fields S_IFSOCK 0140000 socket S_IFLNK 0120000 symbolic link S_IFREG 0100000 regular file S_IFBLK 0060000 block device S_IFDIR 0040000 directory S_IFCHR 0020000 character device S_IFIFO 0010000 fifo S_ISUID 0004000 set UID bit S_ISGID 0002000 set GID bit S_ISVTX 0001000 sticky bit S_IRWXU 00700 user (file owner) has read, write <h3>Linux 1.1.75 1 January 1995 2 </h3> <h3>STAT(2) Linux Programmer's Manual STAT(2) </h3> and execute permission S_IRUSR (S_IREAD) 00400 user has read permission S_IWUSR (S_IWRITE) 00200 user has write permission S_IXUSR (S_IEXEC) 00100 user has execute permission S_IRWXG 00070 group has read, write and execute permission S_IRGRP 00040 group has read permission S_IWGRP 00020 group has write permission S_IXGRP 00010 group has execute permission S_IRWXO 00007 others have read, write and execute permission S_IROTH 00004 others have read permission S_IWOTH 00002 others have write permisson S_IXOTH 00001 others have execute permission <h3>RETURN VALUE </h3> On success, zero is returned. On error, -1 is returned, and errno is set appropriately. <h3>ERRORS </h3> EBADF filedes is bad. ENOENT File does not exist. <h3>CONFORMING TO </h3> SVID (not lstat()), AT&T (not lstat()), POSIX (not lstat()), X/OPEN (not lstat()), BSD 4.3 </pre> <hr> <h3>SEE ALSO </h3><p> <a href=chmod.htm>chmod</a>, <a href=chown.htm>chown</a>, <a href=readlink.htm>readlink</a>, <a href=utime.htm>utime</a>, <pre> <h3>Linux 1.1.75 1 January 1995 3 </h3> </pre> <P> <hr> <p> <center> <table border=2 width=80%> <tr align=center> <td width=25%> <a href=../index.htm>Top</a> </td><td width=25%> <a href=../master_index.html>Master Index</a> </td><td width=25%> <a href=../SYNTAX/keywords.html>Keywords</a> </td><td width=25%> <a href=../FUNCTIONS/index.htm>Functions</a> </td> </tr> </table> </center> <p> <hr> This manual page was brought to you by <i>mjl_man V-2.0</i>
file: /Techref/language/ccpp/Cref/MAN/stat.htm, 5KB, , updated: 2003/3/20 10:39, local time: 2024/8/23 02:18,
3.21.12.152:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/tecHREF/language/ccpp/Cref/MAN/stat.htm"> stat</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to piclist.com! |
.