<TITLE>vfprintf</TITLE> <body bgcolor="#ffffcc"> <hr> <pre> <h3>PRINTF(3) Linux Programmer's Manual PRINTF(3) </h3> <h3>NAME </h3> printf, fprintf, sprintf, vprintf, vfprintf, vsprintf - formatted output conversion <h3>SYNOPSIS </h3> #include <stdio.h> int printf( const char *format, ...); int fprintf( FILE *stream, const char *format, ...); int sprintf( char *str, const char *format, ...); #include <stdarg.h> int vprintf( const char *format, va_list ap); int vfprintf( FILE *stream, const char *format, va_list ap); int vsprintf( char *str, char *format, va_list ap); <h3>DESCRIPTION </h3> The printf family of functions produces output according to a format as described below. Printf and vprintf write output to stdout, the standard output stream; fprintf and vfprintf write output to the given output stream; sprintf, and vsprintf write to the character string str. These functions write the output under the control of a format string that specifies how subsequent arguments (or argu- ments accessed via the variable-length argument facilities of stdarg(3) are converted for output. These functions return the number of characters printed (not including the trailing `\0' used to end output to strings). The format string is composed of zero or more directives: ordinary characters (not %), which are copied unchanged to the output stream; and conversion specifications, each of which results in fetching zero or more subsequent argu- ments. Each conversion specification is introduced by the character %. The arguments must correspond properly (after type promotion) with the conversion specifier. After the %, the following appear in sequence: o Zero or more of the following flags: # specifying that the value should be con- verted to an ``alternate form''. For c, d, i, n, p, s, and u conversions, this option has no effect. For o conversions, the pre- cision of the number is increased to force the first character of the output string to a zero (except if a zero value is printed with an explicit precision of zero). For x and X conversions, a non-zero result has the string `0x' (or `0X' for X conversions) prepended to it. For e, E, f, g, and G con- versions, the result will always contain a <h3>BSD MANPAGE 29 November 1993 1 </h3> <h3>PRINTF(3) Linux Programmer's Manual PRINTF(3) </h3> decimal point, even if no digits follow it (normally, a decimal point appears in the results of those conversions only if a digit follows). For g and G conversions, trailing zeros are not removed from the result as they would otherwise be. 0 specifying zero padding. For all conver- sions except n, the converted value is padded on the left with zeros rather than blanks. If a precision is given with a numeric conversion (d, i, o, u, i, x, and X), the 0 flag is ignored. - (a negative field width flag) indicates the converted value is to be left adjusted on the field boundary. Except for n conver- sions, the converted value is padded on the right with blanks, rather than on the left with blanks or zeros. A - overrides a 0 if both are given. (a space) specifying that a blank should be left before a positive number produced by a signed conversion (d, e, E, f, g, G, or i). + specifying that a sign always be placed before a number produced by a signed conver- sion. A + overrides a space if both are used. o An optional decimal digit string specifying a mini- mum field width. If the converted value has fewer characters than the field width, it will be padded with spaces on the left (or right, if the left- adjustment flag has been given) to fill out the field width. o An optional precision, in the form of a period (`.') followed by an optional digit string. If the digit string is omitted, the precision is taken as zero. This gives the minimum number of digits to appear for d, i, o, u, x, and X conversions, the number of digits to appear after the decimal-point for e, E, and f conversions, the maximum number of significant digits for g and G conversions, or the maximum number of characters to be printed from a string for s conversions. o The optional character h, specifying that a follow- ing d, i, o, u, x, or X conversion corresponds to a short int or unsigned short int argument, or that a following n conversion corresponds to a pointer to a short int argument. <h3>BSD MANPAGE 29 November 1993 2 </h3> <h3>PRINTF(3) Linux Programmer's Manual PRINTF(3) </h3> o The optional character l (ell) specifying that a following d, i, o, u, x, or X conversion applies to a pointer to a long int or unsigned long int argu- ment, or that a following n conversion corresponds to a pointer to a long int argument. o The character L specifying that a following e, E, f, g, or G conversion corresponds to a long double argument. o A character that specifies the type of conversion to be applied. A field width or precision, or both, may be indicated by an asterisk `*' instead of a digit string. In this case, an int argument supplies the field width or precision. A negative field width is treated as a left adjustment flag followed by a positive field width; a negative precision is treated as though it were missing. The conversion specifiers and their meanings are: diouxX The int (or appropriate variant) argument is con- verted to signed decimal (d and i), unsigned octal (o, unsigned decimal (u, or unsigned hexadecimal (x and X) notation. The letters abcdef are used for x conversions; the letters ABCDEF are used for X con- versions. The precision, if any, gives the minimum number of digits that must appear; if the converted value requires fewer digits, it is padded on the left with zeros. DOU The long int argument is converted to signed deci- mal, unsigned octal, or unsigned decimal, as if the format had been ld, lo, or lu respectively. These conversion characters are deprecated, and will eventually disappear. eE The double argument is rounded and converted in the style [-]d.dddedd where there is one digit before the decimal-point character and the number of dig- its after it is equal to the precision; if the pre- cision is missing, it is taken as 6; if the preci- sion is zero, no decimal-point character appears. An E conversion uses the letter E (rather than e) to introduce the exponent. The exponent always contains at least two digits; if the value is zero, the exponent is 00. f The double argument is rounded and converted to decimal notation in the style [-]ddd.ddd, where the number of digits after the decimal-point character is equal to the precision specification. If the precision is missing, it is taken as 6; if the <h3>BSD MANPAGE 29 November 1993 3 </h3> <h3>PRINTF(3) Linux Programmer's Manual PRINTF(3) </h3> precision is explicitly zero, no decimal-point character appears. If a decimal point appears, at least one digit appears before it. g The double argument is converted in style f or e (or E for G conversions). The precision specifies the number of significant digits. If the precision is missing, 6 digits are given; if the precision is zero, it is treated as 1. Style e is used if the exponent from its conversion is less than -4 or greater than or equal to the precision. Trailing zeros are removed from the fractional part of the result; a decimal point appears only if it is fol- lowed by at least one digit. c The int argument is converted to an unsigned char, and the resulting character is written. s The ``char *'' argument is expected to be a pointer to an array of character type (pointer to a string). Characters from the array are written up to (but not including) a terminating NUL character; if a precision is specified, no more than the num- ber specified are written. If a precision is given, no null character need be present; if the precision is not specified, or is greater than the size of the array, the array must contain a termi- nating NUL character. p The ``void *'' pointer argument is printed in hex- adecimal (as if by %#x or %#lx). n The number of characters written so far is stored into the integer indicated by the ``int *'' (or variant) pointer argument. No argument is con- verted. % A `%' is written. No argument is converted. The complete conversion specification is `%%'. In no case does a non-existent or small field width cause truncation of a field; if the result of a conversion is wider than the field width, the field is expanded to con- tain the conversion result. <h3>EXAMPLES </h3> To print a date and time in the form `Sunday, July 3, 10:02', where weekday and month are pointers to strings: #include <stdio.h> fprintf(stdout, "%s, %s %d, %.2d:%.2d\n", weekday, month, day, hour, min); To print to five decimal places: <h3>BSD MANPAGE 29 November 1993 4 </h3> <h3>PRINTF(3) Linux Programmer's Manual PRINTF(3) </h3> #include <math.h> #include <stdio.h> fprintf(stdout, "pi = %.5f\n", 4 * atan(1.0)); To allocate a 128 byte string and print into it: #include <stdio.h> #include <stdlib.h> #include <stdarg.h> char *newfmt(const char *fmt, ...) { char *p; va_list ap; if ((p = malloc(128)) == NULL) return (NULL); va_start(ap, fmt); (void) vsnprintf(p, 128, fmt, ap); va_end(ap); return (p); } </pre> <hr> <h3>SEE ALSO </h3><p> <a href=printf.htm>printf</a>, <a href=scanf.htm>scanf</a>, <pre> <h3>STANDARDS </h3> The fprintf, printf, sprintf, vprintf, vfprintf, and vsprintf functions conform to ANSI C3.159-1989 (``ANSI C''). <h3>BUGS </h3> Some floating point conversions under Linux cause memory leaks. The conversion formats %D, %O, and %U are not standard and are provided only for backward compatibility. These may not be provided under Linux. The effect of padding the %p format with zeros (either by the 0 flag or by specifying a precision), and the benign effect (i.e., none) of the # flag on %n and %p conver- sions, as well as other nonsensical combinations such as %Ld, are not standard; such combinations should be avoided. Because sprintf and vsprintf assume an infinitely long string, callers must be careful not to overflow the actual space; this is often impossible to assure. <h3>BSD MANPAGE 29 November 1993 5 </h3> </pre> <P> <hr> <p> <center> <table border=2 width=80%> <tr align=center> <td width=25%> <a href=../index.htm>Top</a> </td><td width=25%> <a href=../master_index.html>Master Index</a> </td><td width=25%> <a href=../SYNTAX/keywords.html>Keywords</a> </td><td width=25%> <a href=../FUNCTIONS/index.htm>Functions</a> </td> </tr> </table> </center> <p> <hr> This manual page was brought to you by <i>mjl_man V-2.0</i>
file: /Techref/language/ccpp/Cref/MAN/vfprintf.htm, 13KB, , updated: 2003/3/20 10:40, local time: 2024/8/22 22:50,
18.117.168.160:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/tecHREF/language/ccpp/Cref/MAN/vfprintf.htm"> vfprintf</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
The Backwoods Guide to Computer Lingo |
.