Maurice Reid heeft geschreven in bericht <37450FD6.5BA0@tesco.net> RE: the datasheet specs for the 8052 pull-ups. I'm trying to drive a ULN2003 darlingron array using these ports but haven't worked out if it is possible. The port drivers are specified in terms of Iil at 0v (about -50uA). Other parts talk of the pull-up being equivalent to a 10K resistor. But the figures don't seem to add up
Maurice, If the voltage on the pin is below threshold (as with the darlingtons) a weak pullup is present. If above threshold the internal resistance is 10x lower. Use real pullups on the outside. Arie de Muynck
.8051 I/O usually outputs logic high during reset which can be a pain, as well as having weak pull ups all the time, and this can mean more external hardware considerations.
| file: /techref/8051/iopins.htm, 1KB, , updated: 2007/10/27 22:51, local time: 2008/12/1 17:38,
38.103.63.58:LOG IN
|
| ©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://piclist.com/techref/8051/iopins.htm"> 8051 iopins</A> |
| Did you find what you needed? |
|
PICList 2008 contributors:
o List host: MIT, Site host massmind.org, Top posters @20081201 Apptech, Jinx, Xiaofan Chen, olin piclist, Vitaliy, William \Chops\ Westfield, Tamas Rudnai, JonnyMac, Alan B. Pearce, Gerhard Fiedler, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Timothy Weber, on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
|
.