Interrupt 0Ah EGA Vertical Retrace(0:0028h) (IRQ2) used by EGA vertical retrace, hard disk
note 1) On the Tandy 1000, this interrupt is used by the hard disk
2) The TOPS and PCnet adapters use this interrupt request line by default
(internal) invalid task state segment (80286 protected-mode)
file: /Techref/INT/0A.htm, 0KB, , updated: 1999/2/20 11:27, local time: 2024/9/1 02:34,
18.223.195.167:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/techref/INT/0A.htm"> INT 0A</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to piclist.com! |
.