Function 2Dh Set Time
Sets current system time
entry AH 2Dh
CH hours (0-23)
CL minutes (0-59)
DH seconds (0-59)
DL hundredths of seconds (0-99)
return AL 00h if no error
0FFh if bad value sent to routine
note 1) DOS 3.3 also sets CMOS clock
2) CX and DX must contain a valid time in binary
| file: /techref/INT/21f/2d.htm, 0KB, , updated: 1999/2/20 11:26, local time: 2010/3/15 13:07,
38.107.191.113:LOG IN
|
| ©2010 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://piclist.com/techref/INT/21f/2d.htm"> INT 21f 2d</A> |
| Did you find what you needed? |
LCD Front Panel Set: $8.99!
- 2x16 LCD HD44780 controller - 4 push buttons - 3 LEDs - 2x12 header |
|
The only consistant, simple to use yet powerful development environment. It simulates real-world devices via virtual component "plugins" (LED,LCD,key,motor,TV,etc) in real time, has a syntax highlighting editor, macro assembler and disassembler. Regular updates and third-party plugins keep this software ahead of any other PIC IDE. |
.