please dont rip this site
GRAFTABL + Loading Graphics Characters

Loads graphics characters with ASCII codes greater than 127

so that they can be used with the color/graphics adapter.


PC-DOS 3.0+

MS-DOS equivalent: GRAFTABL (3.0+)




[d:][path] GRAFTABL [nnn][/STATUS]


[d:][path] Specifies the drive letter and path that

contain the GRAFTABL command file.

nnn Specifies the country code page

according to the following values:

437 United States (default)

860 Portugal

863 Canada (French)

865 Norway and Denmark

/STATUS Displays the number of the current

country code page.



loads the table of graphics characters for the Canadian (French)

code page. ASCII characters 128 through 255 will now be displayed

in the graphics mode if the system has a color/graphics adapter.


Incorrect parameter

An unidentifiable parameter was specified. Check the parameters

and retry.

No version of Graphic Character Set Table is already


GRAFTABL has not been used to load character tables; no action is


Non-Standard version of Graphics Character Set Table is

already loaded

A previously loaded character set table has been modified; no

action is required.

nnn version of Graphic Character Set Table is now loaded

The code page numbered nnn has been loaded; no further action is



When this command has been executed, it increases the size

of DOS by 1296 bytes. GRAFTABL may be used multiple times to

change the loaded graphics characters.


[For related topics, press R]



MODE Command

file: /Techref/dos/command/graftabl.htm, 2KB, , updated: 1999/2/20 11:24, local time: 2024/4/13 19:06,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> dos command graftabl</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2024 contributors:
o List host: MIT, Site host, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!