the MassMind
...content heavy,
light sales...
NOTICE: This store is closing
Kits | Books | Gadgets | Cables | Services | Stepper Drivers
Products > Stepper Drivers > RULMS3_PIC: Linistepper programmed uC (Chip ONLY!)

This is the pre-programmed uC heart of the Linistepper controller. Each controller uses one of these PIC microcontrollers so if you purchase the set of 3 blank PCB''s you need THREE of these to populate each of of the boards in the set.

Note: we will assume you want the chips for the V3 Linistepper! For the V2, please specify in the notes when ordering. Or, since the V2 is fully open source, if you have PIC 16F628A chips and a programmer for them, you can load the Source code yourself using MPLAB from MicroChip.com


Compatibility: Replacement chip for Linistepper.
footprint: SDIP - Skinny DIP (300 mil body).
logic family: TTL.
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 Backordered!   Expected in 1 weeks

You may also be interested in:
416026 Blank PCBs
416015 Chip is included in full kit

user @44.192.107.255, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Services, and these Stepper Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 1 in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 2 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 3 in stock
4Axis5_pwr:5V regulator parts $2.00 2 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 5 in stock
6064A: Adapter cable Pololu $4.95 6 in stock
6064P: Stepper Motor Driver (PCB/SMT ONLY!) $10.95 42 in stock