Function 26h Create New Program Segment Prefix (PSP) This service copies the current program-segment prefix to a new memory location for the creation of a new program or overlay. Once the new PSP is in place, a DOS program can read a DOS COM or overlay file into the memory location immediately following the new PSP and pass control to it. entry AH 26h DX segment number for the new PSP return none note 1) Microsoft recommends you use the newer DOS service 4Bh (EXEC) instead. 2) The entire 100h area at location 0 in the current PSP is copied into location 0 of the new PSP. The memory size information at location 6 in the new segment is updated and the current termination, ctrl-break, and critical error addresses from interrupt vector table entries for ints 22h, 23h, and 24 are saved in the new program segment starting at 0Ah. They are restored from this area when the program terminates. 3) Current PSP is copied to specified segment
file: /Techref/int/21f/26.htm, 1KB, , updated: 2001/5/16 11:50, local time: 2024/8/14 23:06,
3.147.62.19:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/techref/int/21f/26.htm"> int 21f 26</A> |
Did you find what you needed? |
PICList 2024 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to piclist.com! |
.