"... the interconnection of uniquely identifiable embedded computing devices within the existing Internet infrastructure."
Can be direct via Ethernet or Wifi internet connection from the embedded device, or indirect via any other means of IO to/from another device which is directly connected. Since few embedded devices have the computing power and memory necessary to manage TCP/IP stack, most IOT devices are indirectly connected... often to a local PC, SmartPhone, Router, or other dedicated device. There are "internet modems", such as the ESP 8266, available which act only to bridge a low power embedded device (Arduino, etc...) to the internet, but then if you have the computing power on the "modem" why do you need the embedded processor? Why not just do everything on the "modem"?
|file: /Techref/io/iots.htm, 1KB, , updated: 2018/9/22 09:35, local time: 2022/12/3 10:04,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://piclist.com/techref/io/iots.htm"> Internet Of Things, IOT, I.O.T.</A>
|Did you find what you needed?|
PICList 2022 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to piclist.com!