HORIZONTAL MOTION INDEX ( HMI ) LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT HORIZONTAL MOTION INDEX The Horizontal Motion Index ( HMI ) escape sequence will allow you to adjust the horizontal character spacing of your fonts by placing the characters closer together or further apart. HMI will not alter the point size of your fonts. The HMI command should always be sent after any page orientation command. Changes in the default left or right margin will result in a change to the default horizontal printable area. To invoke the HMI mode, type Ec&k#H. The # sign designates a variable that is derived from the following formula. (Horizontal Printable Area/Desired Characters per Line) X 120 = # Or: If you know the desired pitch or number of characters per horizontal inch, use the following formula. (120/Desired Characters per Inch) = # HORIZONTAL PRINTABLE AREA DEFAULTS 1) portrait letter (8-1/2 x 11) = 8 inches 2) portrait legal (8-1/2 x 14) = 8 inches 3) landscape letter (11 x 8-1/2) = 10.5 inches 4) landscape legal (14 x 8-1/2) = 13.5 inches Example: To designate 88 characters per line on letter sized paper, portrait orientation, using the default 10 pitch Courier font. (8 inches/88 characters) X 120 = 10.91 Ec&k10.91H Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1202.asc, 1KB, , updated: 1993/11/15 15:51, local time: 2022/11/29 14:02,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://piclist.com/techref/language/pcl/lj1202.asc"> language pcl lj1202</A>
|Did you find what you needed?|
PICList 2022 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to piclist.com!