CREATING A MIRROR-IMAGE
For more information see the PCL5 Printer Language
Technical Reference Manual.
LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT
EcE Resets the printer.
Ec%0B Enters HP-GL/2 Mode.
IN; Initializes HP-GL/2 Mode.
SP1; Selects pen number 1. You
must use the SP command
to enable printing.
IP1500,3600,3000,5100; Specifies the P1/P2
locations for the first
arrow figure.
SC-15,15,-10,10; Sets up user scaling: (-
15,-10) to (15,10).
(Subroutine) Replace (Subroutine) with
the actual subroutine
following this program.
This subroutine will draw
an arrow image on the
page.
IP3000,3600,1500,5100; Changes the physical
locations of P1 and P2 to
flip the image to the
left.
(Subroutine) Prints the second arrow
image.
IP1500,5100,3000,3600; Changes the physical
locations of P1 and P2 to
flip the image down.
(Subroutine) Prints the third arrow
image.
IP3000,5100,1500,3600; Changes the physical
locations of P1 and P2 to
flip the image to the
left and down.
(Subroutine) Prints the fourth arrow
image.
Ec%0A Enters the PCL mode.
EcE Sends a reset to end the
job and eject the page.
SUBROUTINE TO PRINT THE ARROW IMAGE
PA1,2;PD1,4,3,4,3,7,2,7,
4,9,6,7,5,7,5,4,12,4,12,5,
14,3,12,1,12,2,1,2;PU;
Copyright Hewlett-Packard Co. 1993
The information contained herein is subject to change
without notice.
Hewlett-Packard shall not be liable for incidental or
consequential damages in connection with the use of this
material.
| file: /techref/language/pcl/lj1832.asc, 2KB, , updated: 1993/11/15 16:10, local time: 2009/11/21 08:16,
38.107.191.101:LOG IN
|
| ©2009 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://piclist.com/techref/language/pcl/lj1832.asc"> language pcl lj1832</A> |
| Did you find what you needed? |
|
Calculator 7-seg LED chars, port values, resistor color codes and common values, ohms law, wavelength / frequency, RMS and Peak, max value for x bits, etc... |
 Peter Todd has released source and sample projects for his artwork, including his 3d wireframe cube renderer for the PIC 18f6520 This includes examples of hardware developed with free software tools such as gEDA/gschem/PCB, SDCC, gputils and picp all on Linux. http://petertodd.ca/art/source-code/ |
.