//////////////////////////////////////////////////////////
// pcl2bmp.cpp
//////////////////////////////////////////////////////////
#include <ctype.h>
#include <fstream.h>
#include <iostream.h>
#include <math.h>
#ifdef __WATCOMC__
#include <mem.h>
#else
#include <memory.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "bmpio.h"
#include "pcl2bmp.h"
#include "rasterop.h"
#include "softfont.h"
#include "util.h"
static int px, py;
static int rasterx, rastery;
static int patternf;
static int patternx, patterny;
static int patternw, patternh;
static FONTNODE *curfont[2]; // primary & secondary
static int fontshift;
static int fontid;
static int charcode;
static unsigned char bits[3300][300];
static int dirtybits;
static BMPINFO bmpinfo;
static int debugtrace, debugerror;
int pcl2bmp( char *NamePcl, char *NameBmp );
int Execute( COMMAND& command, ifstream& ifPcl );
/////////////////////////////////////////////////////////////////
// main
/////////////////////////////////////////////////////////////////
main( int argc, char *argv[] )
{
bmpinfo.bits = (unsigned char *)bits;
bmpinfo.width = 2400;
bmpinfo.height = 3300;
bmpinfo.colours = 2;
bmpinfo.palette = NULL;
bmpinfo.cropx = bmpinfo.cropy = 0;
bmpinfo.scalex = bmpinfo.scaley = 1;
for( int i=1; i<argc; i++ )
{
if( argv[i][0] != '-' )
break;
if( !stricmp(argv[i], "-c") )
bmpinfo.cropx = bmpinfo.cropy = 1;
else if( !stricmp(argv[i], "-cx") )
bmpinfo.cropx = 1;
else if( !stricmp(argv[i], "-cy") )
bmpinfo.cropy = 1;
else if( !strnicmp(argv[i], "-sx", 3) )
bmpinfo.scalex = atoi( argv[i] + 3 );
else if( !strnicmp(argv[i], "-sy", 3) )
bmpinfo.scaley = atoi( argv[i] + 3 );
else if( !strnicmp(argv[i], "-s", 2) )
bmpinfo.scalex = bmpinfo.scaley = atoi( argv[i] + 2 );
else if( !stricmp(argv[i], "-trace") )
debugtrace = 1;
else if( !stricmp(argv[i], "-debug") )
debugerror = 1;
else
cerr << "bmp2pcl: unknown option " << argv[i] << endl;
}
if( bmpinfo.scalex < 1 )
bmpinfo.scalex = 1;
if( bmpinfo.scaley < 1 )
bmpinfo.scaley = 1;
if( argc - i < 2 )
{
cerr << endl;
cerr << "pcl2bmp: convert HP LaserJet print file to bitmap" << endl << endl;
cerr << " usage: pcl2bmp {options} infile.prn outfile" << endl;
cerr << " the output file(s) will be named outfile1.bmp, outfile2.bmp, ..." << endl << endl;
cerr << "options: -c crop top, bottom, left, and right edges" << endl;
cerr << " -cx crop left and right edges" << endl;
cerr << " -cy crop top and bottom edges" << endl;
cerr << " -s# shrink width and height by factor of '#'" << endl;
cerr << " -sx# shrink width by factor of '#'" << endl;
cerr << " -sy# shrink height by factor of '#'" << endl << endl;
cerr << " -trace output trace log to stdout" << endl;
cerr << " -debug output error log to stderr" << endl;
return 1;
}
pcl2bmp( argv[i], argv[i+1] );
return 0;
}
int pcl2bmp( char *NamePcl, char *NameBmp )
{
ifstream ifPcl( NamePcl, ios::in | ios::binary | ios::nocreate );
ifPcl.setf( ios::binary, ios::binary | ios::skipws );
int PageNo = 1;
char PageNameBmp[1024];
static COMMAND command0;
COMMAND command;
int phase = 0;
int ch;
ch = ifPcl.get();
while( ch != EOF )
{
switch( phase )
{
case 0: // search for ESC/control sequence
if( ch == 0x1B )
{ // ESC
command = command0;
command.control = ch;
phase++;
}
else if( ch < ' ' || ch == 0x7f )
{ // other control character
command.control = ch;
switch( command.control )
{
case 0x0C: // Form-Feed
if( dirtybits )
{
sprintf( PageNameBmp, "%s%d.bmp", NameBmp, PageNo );
bmp_save( PageNameBmp, &bmpinfo );
memset( bits, 0, sizeof(bits) );
dirtybits = 0;
}
PageNo++;
if( debugtrace )
cout << endl << "Ff ";
break;
case 0x0E: // SO: select secondary font
fontshift = 1;
if( debugtrace )
cout << endl << "So ";
break;
case 0x0F: // SI: select primary font
fontshift = 0;
if( debugtrace )
cout << endl << "Si ";
break;
default:
if( debugerror )
cerr << endl << hex << "unk: 0x" << ch << " " << dec;
break;
}
}
else
{
px += (font_drawchar( bits, px, py, curfont[fontshift], ch ) + 2) / 4;
dirtybits = 1;
if( debugtrace )
cout << char(ch);
}
break;
case 1:
if( ch >= '!' && ch <= '/' )
{
command.group1 = ch;
phase++;
}
else if( ch >= '0' && ch <= '~' )
{ // two character escape sequence
command.term = ch;
Execute( command, ifPcl );
phase = 0;
}
else
{
if( debugtrace )
cout << endl << "unk: Ec " << hex << "0x" << ch << dec << " " << endl;
phase = 0;
}
break;
case 2:
phase++;
command.sign = 0;
command.value = 0.0;
if( ch >= '`' && ch <= '~' )
{
command.group2 = ch;
}
else
{
command.group2 = 0;
continue;
}
break;
case 3:
if( ch=='+' || ch=='-' )
{
command.sign = ch;
ch = ifPcl.get();
}
while( ch != EOF && isdigit(ch) )
{
command.value = command.value * 10 + (ch - '0');
ch = ifPcl.get();
}
if( ch=='.' )
{
double frac = 0.1;
while( (ch = ifPcl.get()) != EOF && isdigit(ch) )
{
command.value += (ch - '0') * frac;
frac /= 10;
}
}
if( command.sign == '-' )
command.value = -command.value;
phase++;
continue;
case 4:
command.term = ch;
Execute( command, ifPcl );
if( ch >= '`' && ch <= '~' )
{
phase = 3;
command.sign = 0;
command.value = 0;
}
else
phase = 0;
break;
}
ch = ifPcl.get();
} // while
if( dirtybits )
{
sprintf( PageNameBmp, "%s%d.bmp", NameBmp, PageNo );
bmp_save( PageNameBmp, &bmpinfo );
}
return 0;
}
int Execute( COMMAND& command, ifstream& ifPcl )
{
command.error = 1; // unrecognized command
if( command.control == 0x1B )
{
switch( command.group1 )
{
case 0:
switch( command.term )
{
case 'E': // reset
command.error = 2;
break;
}
break;
case ')':
case '(':
switch( command.group2 )
{
case 's':
switch( command.term )
{
case 'W':
if( command.group1 == ')' )
{ // font descriptor and data
int cdata = int(command.value);
char *pdata = new char[cdata];
if( pdata )
{
ifPcl.read( pdata, cdata );
font_new( fontid, pdata, cdata );
delete pdata;
}
}
else
{ // char descriptor and data
int cdata = int(command.value);
char *pdata = new char[cdata];
if( pdata )
{
ifPcl.read( pdata, cdata );
font_newchar( fontid, charcode, pdata, cdata );
delete pdata;
}
}
command.error = 0;
break;
}
break;
case 0:
if( toupper(command.term) == 'X' )
{
curfont[command.group1==')'] = font_find( int(command.value) );
command.error = 0;
}
break;
}
break;
case '*':
switch( command.group2 )
{
case 'b': // Raster Graphics
switch( toupper(command.term) )
{
case 'M': // set compression method
// 0=unencoded
// 1=run-length encoding
// 2=TIFF revision 4.0
// 3=delta row
// 5=adaptive compression
command.error = 2; // ignored command
break;
case 'W': // transfer raster data
{
int i = rasterx/8, j = rasterx % 8;
int n = int(command.value);
int ch;
while( n-- && (ch = ifPcl.get()) != EOF )
{
if( ch )
{
dirtybits = 1;
bits[rastery][i++] |= ch >> j;
bits[rastery][i] |= ch << (8-j);
}
else
i++;
}
rastery++;
py++;
}
command.error = 0; // processed command
break;
case 'Y': // y offset
command.error = 2; // ignored command
break;
}
break;
case 'c': // Rectangular Area Fill Graphics
switch( toupper(command.term) )
{
case 'A': // rectangle width (dots)
patternw = int(command.value);
command.error = 0;
break;
case 'B': // rectangle height (dots)
patternh = int(command.value);
command.error = 0;
break;
case 'H': // rectangle width (decipoints)
patternw = int( (long(command.value * 300) + 719) / 720 );
command.error = 0;
break;
case 'V': // rectangle height (decipoints)
patternh = int( (long(command.value * 300) + 719) / 720 );
command.error = 0;
break;
case 'G': // area fill ID (pattern ID)
// shading: 1-2, 2-10, 11-20, 21-35, 36-55, 56-80, 81-99, 100
// cross-hatch: 1 -, 2 |, 3 /, 4 \, 5 #, 6 X
// user-defined: # of pattern (0-32767)
command.error = 2; // ignored
break;
case 'P': // fill rectangular area
switch( int(command.value) )
{
case 0: // solid
if( patternw > 0 && patternh > 0 )
{
bit_set( bits, px, py, px + patternw - 1, py + patternh - 1 );
dirtybits = 1;
}
command.error = 0;
break;
case 1: // solid white
command.error = 2; // ignored
break;
case 2: // shading
command.error = 2; // ignored
break;
case 3: // cross-hatch pattern
command.error = 2; // ignored
break;
case 4: // user-defined pattern
command.error = 2; // ignored
break;
case 5: // current pattern
command.error = 2; // ignored
break;
}
break;
case 'Q': // pattern control
// 0=delete all paterns
// 1=delete all temporary patterns
// 2=delete pattern (last pattern ID specified)
// 3=reserved
// 4=make pattern temporary (last pattern ID specified)
// 5=make pattern permanent (last pattern ID specified)
command.error = 2; // ignored
break;
case 'W': // user-defined pattern
// followed by # of pattern bytes
ifPcl.ignore( int(command.value) );
command.error = 2; // ignored
break;
case 'D': // font ID
fontid = int(command.value);
command.error = 0;
break;
case 'E': // char code
charcode = int(command.value);
command.error = 0;
break;
case 'F': // soft font control
command.error = 2; // ignored
break;
}
break;
case 'p': // Cursor Positioning/Rectangular Area Fill Graphics
switch( toupper(command.term) )
{
case 'R': // set pattern reference point
// 0=rotate patterns with print direction
// 1=keep patterns fixed
patternf = int(command.value);
patternx = px;
patterny = py;
command.error = 2; // ignored
break;
case 'X': // horizontal (dots)
if( command.sign )
px += int(command.value);
else
px = int(command.value);
command.error = 0;
break;
case 'Y': // vertical (dots)
if( command.sign )
py += int(command.value);
else
py = int(command.value);
command.error = 0;
break;
}
break;
case 'r': // Raster Graphics
switch( toupper(command.term) )
{
case 'A': // start
// 0=at x-position 0
// 1=at current x-position
if( int(command.value) )
rasterx = px;
else
rastery = 0;
rastery = py;
command.error = 0;
break;
case 'B': // end: any LaserJet
case 'C': // end: LJ IIISi and IIIP
command.error = 0;
break;
case 'F': // presentation mode
// 0=current print direction
// 3=along width of physical page
command.error = 2; // ignored
break;
case 'S': // raster width
command.error = 2; // ignored
break;
case 'T': // raster height
command.error = 2; // ignored
break;
}
break;
case 't': // Raster Graphics
if( toupper(command.term) == 'R' )
{ // Resolution: values 75, 100, 150, 300
if( int(command.value) == 300 )
command.error = 0;
else
command.error = 2; // ignored
}
break;
}
break;
}
}
if( command.control == 0x1B )
{
ostream *pcout;
switch( command.error )
{
case 0:
pcout = &cout;
if( debugtrace )
*pcout << endl;
break;
case 1:
pcout = &cerr;
if( debugerror )
*pcout << endl << "unk: ";
break;
case 2:
pcout = &cerr;
if( debugerror )
*pcout << endl << "nop: ";
break;
default:
pcout = &cerr;
if( debugerror )
*pcout << endl << "int: ";
break;
}
if( pcout == &cout && debugtrace ||
pcout == &cerr && debugerror )
{
if( command.group1 )
{
*pcout << "Ec " << command.group1;
if( command.group2 )
*pcout << command.group2;
*pcout << command.term << " ";
if( command.sign )
*pcout << command.sign;
*pcout << fabs(command.value) << " ";
}
else
{
*pcout << "Ec " << command.term << " ";
}
}
}
return 0;
}
| file: /Techref/language/pcl/pickle/pcl2bmp_cpp.htm, 93KB, , updated: 2001/4/5 15:46, local time: 2024/4/24 16:08,
18.117.142.128:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/techref/language/pcl/pickle/pcl2bmp_cpp.htm"> Colorized Source Code</A> |
| Did you find what you needed? |
|
PICList 2024 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to piclist.com! |
.