PRIVATE char *intlmime_decode_qp(char *in)
{
int i = 0, length;
char token[3];
char *out, *dest = 0;
out = dest = (char *)XP_ALLOC(strlen(in)+1);
if (dest == NULL)
return NULL;
memset(out, 0, strlen(in)+1);
length = strlen(in);
while (length > 0 || i != 0)
{
while (i < 3 && length > 0)
{
token [i++] = *in;
in++;
length--;
}
if (i < 3)
{
/* Didn't get enough for a complete token.
If it might be a token, unread it.
Otherwise, just dump it.
*/
strncpy (out, token, i);
break;
}
i = 0;
if (token [0] == '=')
{
unsigned char c = 0;
if (token[1] >= '0' && token[1] <= '9')
c = token[1] - '0';
else if (token[1] >= 'A' && token[1] <= 'F')
c = token[1] - ('A' - 10);
else if (token[1] >= 'a' && token[1] <= 'f')
c = token[1] - ('a' - 10);
else if (token[1] == CR || token[1] == LF)
{
/* =\n means ignore the newline. */
if (token[1] == CR && token[2] == LF)
; /* swallow all three chars */
else
{
in--; /* put the third char back */
length++;
}
continue;
}
else
{
/* = followed by something other than hex or newline -
pass it through unaltered, I guess. (But, if
this bogus token happened to occur over a buffer
boundary, we can't do this, since we don't have
space for it. Oh well. Forget it.) */
if (in > out) *out++ = token[0];
if (in > out) *out++ = token[1];
if (in > out) *out++ = token[2];
continue;
}
/* Second hex digit */
c = (c << 4);
if (token[2] >= '0' && token[2] <= '9')
c += token[2] - '0';
else if (token[2] >= 'A' && token[2] <= 'F')
c += token[2] - ('A' - 10);
else if (token[2] >= 'a' && token[2] <= 'f')
c += token[2] - ('a' - 10);
else
{
/* We got =xy where "x" was hex and "y" was not, so
treat that as a literal "=", x, and y. (But, if
this bogus token happened to occur over a buffer
boundary, we can't do this, since we don't have
space for it. Oh well. Forget it.) */
if (in > out) *out++ = token[0];
if (in > out) *out++ = token[1];
if (in > out) *out++ = token[2];
continue;
}
*out++ = (char) c;
}
else
{
*out++ = token [0];
token[0] = token[1];
token[1] = token[2];
i = 2;
}
}
/* take care of special underscore case */
for (out = dest; *out; out++)
if (*out == '_') *out = ' ';
return dest;
}
| file: /techref/method/codec/qpdecode.htm, 3KB, , updated: 1999/12/21 11:24, local time: 2009/11/21 11:52,
38.107.191.102:LOG IN
|
| ©2009 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://piclist.com/techref/method/codec/qpdecode.htm"> method codec qpdecode</A> |
| Did you find what you needed? |
LCD Front Panel Set: $8.99!
- 2x16 LCD HD44780 controller - 4 push buttons - 3 LEDs - 2x12 header |
|
The only consistant, simple to use yet powerful development environment. It simulates real-world devices via virtual component "plugins" (LED,LCD,key,motor,TV,etc) in real time, has a syntax highlighting editor, macro assembler and disassembler. Regular updates and third-party plugins keep this software ahead of any other PIC IDE. |
.