Update: 3 May 2003
As part of a class project I've taken it upon myself to convert these i2c
routines into a general purpose I2C template for devices containing the
I2C module. I expect to produce a general purpose template within the next few days using John Sands original code.
I cribbed, borrowed and stole whatever I could, then went back to the 16f87x manual and wound up with a set of master transmit <> receive routines that are *working* - perfectly well as far as I can tell.
This app. has two Philips PCF8574 I2C general purpose byte-wide IO port chips. One (IO1) is dedicated to inputs only, for switch states, etc., while IO2 is output only, to drive a collection of panel LEDs. I have used private macros like :-
bank0 ;use ram bank0 bank1 ;use ram bank1 movlf ;load literal to freg movff ;load freg1 to freg2
etc., these should need no introduction, but if they do, let me know.. Setup the ports by :-
Invoke a IO1 port read by:-
read_switches ;byte-wide result in freg`latest_switch_state'
Invoke a IO2 port write by:-
;put desired byte into freg 'led_state' write_leds
;****************** I2C macros begin start_i2c MACRO ;[S] bank0 ;bank0 (bank0? names) be sure bcf PIR1,SSPIF bank1 ;bank1 bsf SSPCON2,SEN ;send i2c START [S] bit bank0 ;bank0 btfsS PIR1,SSPIF ;start bit cycle complete? goto $-1 endm enable_receive_i2c MACRO bank1 ;bank1 bsf SSPCON2,RCEN ;enable receiving at master 16f877 bank0 ;bank0 bcf PIR1,SSPIF btfsS PIR1,SSPIF ;sspbuf buffer full byte? goto $-1 endm stop_i2c MACRO ;[P] bank0 ;bank0 bcf PIR1,SSPIF bank1 ;bank1 bsf SSPCON2,PEN ;send i2c STOP [P] bit bank0 ;bank0 btfsS PIR1,SSPIF ;stop bit cycle completed? goto $-1 endm wait_for_ack_i2c MACRO bank0 ;bank0 bcf PIR1,SSPIF btfsS PIR1,SSPIF ;ACK received? goto $-1 endm setup_i2c MACRO ;setup mssp for i2c movlf 00101000b,SSPCON ;=0x028 bank1 movlf 10000000b,SSPSTAT movlf 01100000b,SSPCON2 movlf 00001010b,SSPADD bank0 endm read_switches MACRO ;io1 is inputs only start_i2c movlf 01000011b,SSPBUF ;send out io1 pcf8574 addr wait_for_ack_i2c enable_receive_i2c movff SSPBUF,latest_switch_state stop_i2c endm write_leds MACRO ;io2 is output only start_i2c movlf 01000100b,SSPBUF ;sned out io2 address, writing wait_for_ack_i2c movff led_state,SSPBUF wait_for_ack_i2c stop_i2c endm ;***************** I2C macros end
|file: /Techref/microchip/i2c87xjs.htm, 4KB, , updated: 2009/7/25 06:52, local time: 2022/6/25 18:53,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://piclist.com/techref/microchip/i2c87xjs.htm"> PIC Microcontoller Input / Ouput Methods for I2C on 16F87x by John Sand </A>
|Did you find what you needed?|
We sell a few items to support this site
Welcome to piclist.com!