Searching \ for 'Epic programmer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: piclist.com/techref/microchip/devprogs.htm?key=programmer
Search entire site for: 'Epic programmer'.

Truncated match.
PICList Thread
'Epic programmer'
1996\06\22@112637 by Brad Alexander

flavicon
face
Does anyone know about MicroEngineering lab's Epic PIC programmer.  I
just built it and was wandering if I could use the output of MPASM to
as input to the programming software.  I tried once but the programmer
gave an error after it finished. The programmer takes Merged Intel Hex
format or 16 bit binary.

Thanks
Brad

1996\06\22@143732 by David E. Queen

flavicon
face
At 10:25 AM 6/22/96 -0500, you wrote:
>Does anyone know about MicroEngineering lab's Epic PIC programmer.  I
>just built it and was wandering if I could use the output of MPASM to
>as input to the programming software.  I tried once but the programmer
>gave an error after it finished. The programmer takes Merged Intel Hex
>format or 16 bit binary.
>
>Thanks
>Brad
>
I have it and they are working to make the programming software compatible.
I wrote a little test program and debug ed/assembled it in MPLAB.

I had to make a few (not many) changes and run it through their assembler
and it then worked fine. Use the 16c64 demo program as a guide. The guy I
talked to, sorry I don't remember his name,said they were going to make it
compatible. I had a couple of minor problems and all were taken care of to
my complete satisfaction.

I would recommend  Micro Engineering Labs, they treated me great.


'EPIC programmer'
1999\10\27@181240 by Mike M
flavicon
face
Hi i just got my EPIC programmer and when i plug in my PIC16C84 and try to progr
am with the sample program they give u and another sample hex file i have it say
s invalid something at address 0000...however when i read the chip all the space
s where of course 3FFF and while that was loaded into the program area i hit the
WRITE button and it did indeed write to the chip all 3fff's but it does work.
So am i to assume the problem is in my code?? but it assembled fine no errors..?
???

Also anyone know if its possible to program Serial EEPROMS or PIC16C54's through
the EPIC?  I know u cant do '54's with their software anyway...but maybe there
is another pic i can select that will make the program think its a differnt PIC
thats plugged in..???

mikE

Send someone a cool Dynamitemail flashcard greeting!! And get rewarded.
GO AHEAD! http://cards.dynamitemail.com/index.php3?rid=fc-41

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...