'Hart modem crystal or resonator 460.8kHz [OT]'
Has anybody source or information about low frequency crystal ors
All seems to make above 3 MHz or 32 kHz. There is 455 kHz resonators,
but I would like to use right one
for my new Hart protocol modem for pressure sensor
Sorry for OT
Probyte Oy Software/hardware design works. Tampere, Finland
phone int+358-3-2661885 fax: -2661886
> All seems to make above 3 MHz or 32 kHz.
Epson, for one, makes a whole range of tuning-fork-mode crystals
from 32kHz to about 150 kHz.
Transverse mode (strip) crystals start at about 1 MHz. So you might
need a divide by 2 or 4 to get into the 200 kHz to 1 MHz range.
What freq do you need?
Barry King, KA1NLH
NRG Systems "Measuring the Wind's Energy"
Hinesburg, Vermont, USA
More... (looser matching)
- Last day of these posts
- In 1999
, 2000 only
- New search...