please dont rip this site

Hewlett Packard Laser Jet 5 or 5M Printer

The HP 5, 5P, 5Si and 6P series printers (or their corresponding M versions) each require a specific version of the SmartSIMM.  Please specify printer model when ordering.

SmartSIMMs which can be programmed in the LaserJet 5 or 5M now are available; however, LaserJet 4-series SmartSIMMs programmed in the LaserJet 4 series printers also can be installed in the 5 or 5M and the data on the SIMM can be used (read) to print while in the 5 or 5M.  The new firmware version that supports reading and programming of data in the 5 was made available in early May, 1997 and is incorporated in all SIMMs sold specifically for the 5.

The HP Forms and Fonts Manager supports a different type of Flash SIMM when set to work with a LaserJet 5. Again, the LaserJet 5 FLASH setting in the HP Forms and Fonts Manager is not for a smart SIMM. If you need to program forms or fonts into a SmartSIMM in the LaserJet 5, use Transform's File / Print / RAM-FLASH-DISK / Admin option, not HP Forms and Font Manager

Number: 612 11/10/97 "INV PERS" or "INVALID PERSONALITY" when attempting to program forms to Smart SIMM

Number: 640 01/07/98 Areas of a form that are designed to print in a grey shade print black instead.

Menu Map


See also:

file: /Techref/printer/lj5.htm, 1KB, , updated: 2003/8/18 18:24, local time: 2024/4/22 18:12,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> Hewlett Packard Laser Jet&nbsp;5 or 5M Printer</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2024 contributors:
o List host: MIT, Site host, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!