please dont rip this site

Re: Support for HP LJ 4000 and Typhoon printers

These printers have a "directory" that records the Macro ID numbers and what file name they are associated with in the FLASH or Hard drive options. The sample .INI file below with SIMM lines that add new codes for makeing this directory. After all the macros have been sent to the printer the print job should be closed then re-opened and the SIMMDIRInit line should be executed once, then the SIMMDIRLine line should be executed once for each form in the project, then the SIMMDIRExit line should be executed once and the print job closed again.

SIMM9Name=Disk /Dataproducts Typhoon LPE
SIMM9Test=Macro ID:<ID><Esc>|m<IDLEN>Y<ID><Esc>&f107X<0C>

file: /Techref/printer/typhoon.htm, 1KB, , updated: 1999/2/20 13:31, local time: 2024/4/17 09:07,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> printer typhoon</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2024 contributors:
o List host: MIT, Site host, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!