Note : The filters described here are only supported by Internet Explorer 4.0. Strictly speaking, Visual Filters should be detailed under Style Sheets as they are applied by using Style Sheet attributes. However, currently, they are a Microsoft Internet Explorer 4.0 specific style sheets extension (in early versions of Internet Explorer 4.0, the filters were implemented as a set of ActiveX controls, only being implemented as style sheet attributes in the later preview versions of Internet Explorer 4.0
The Visual Filters provide a way for manipulating visual objects (basically, anything on a page) to provide visual effects previously only manageable by using graphics. Also, through scripting, the applied filters are dynamically changeable, without reloading the document, which gives them a major advantage over images. Most commonly, they would be applied to <IMG>
elements, but can be applied to <DIV>
elements, which in turn can contain any HTML, so the visual filters can be applied to virtually any content. Note that if they are applied to text blocks (wrapped in <DIV>
elements, then the <DIV>
element must specify width
and height
style sheet attributes.
Inter-page/site transitions
Internet Explorer 4.0 also supports inter-page and inter-site transitions, using a Visual Filter set in the <META>
element. These can be used to set transitions that play when a page is entered (i.e. first loaded) or exited or when a site (individual sites are determined by a change in the host - i.e. http://www.htmlib.com/ and http://faq.htmlib.com/ would be considered individual sites) is entered, or exited. Any of the standard Visual Filter effects can be used with either blend or reveal transitions. The syntax is as used for other Visual Filters, setting the filter type in the CONTENT
attribute of the <META>
element. For example:
<META HTTP-EQUIV="Page-Enter" CONTENT="filter:RevealTrans(Duration=3.000, Transition=23)">
This would play a random dissolve filter, over 3 seconds when the page is first displayed.
Note : For page-enter
, page-exit
, site-enter
and site-exit
transitions to work, the <META>
element specifying the filter must be the first element in the <HEAD>
section of the document and inter-page transitions do not appear to work across framed documents.
The Visual filters available are:
Filter effect | Description |
Alpha | Sets a uniform transparency level. |
Blur | Creates the impression of moving at high speed. |
Chroma | Makes a specific color transparent. |
DropShadow | Creates a solid silhouette of the object. |
FlipH | Creates a horizontal mirror image. |
FlipV | Creates a vertical mirror image. |
Glow | Adds radiance around the outside edges of the object. |
Gray | Drops color information from the image. |
Invert | Reverses the hue, saturation, and brightness values. |
Light | Projects a light source onto an object. |
Mask | Creates a transparent mask from an object. |
Shadow | Creates an offset solid silhouette. |
Wave | Creates a sine wave distortion along the X axis. |
XRay | Shows just the edges of the object. |
Internet Explorer also supports two Transition Filters (Reveal and Blend transitions) for creating effects for revealing and blending objects.
The basic syntax for applying visual filters to an object is:
STYLE="filter:filtername(fparameter1, fparameter2...)}
where filtername
is the name of the filter (as in the above table) and fparamter1
... represents the parameters associated with each different filter type. These are detailed below, by filter name.
alpha
The Alpha visual filter can be used to set the opacity of an object, either the whole image, or a gradient region.
STYLE="filter:Alpha(Opacity=opacity, FinishOpacity=finishopacity, Style=style, StartX=startX, StartY=startY, FinishX=finishX, FinishY=finishY)"
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Alpha(Opacity="0",FinishOpacity="75",Style="2")
blur
The Blur filter gives the impression that the object is moving.
STYLE="filter:Blur(Add = add, Direction = direction, Strength = strength)"
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Blur(Add="1",Direction="45",Strength="5")
chroma
The Chroma
filter makes a specific colour of the object transparent.
STYLE="filter:Chroma(Color = color)"
#rrggbb
triplet). For the Chroma filter to work properly, this must be a colour used in the object
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Chroma(Color="#FFFFFF")
dropShadow
The dropShadow
filter adds a solid silhouette of the object, offset in the specified direction.
STYLE="filter:DropShadow(Color=color, OffX=offX, OffY=offY, Positive=positive)"
#rrggbb
hex triplet, specifying the colour to use for the shadow
For example:
Pressing the button below the text causes the following filter to be applied:
filter:DropShadow(Color="#6699CC",OffX="5",OffY="5",Positive="1")
flipH
The FlipH
filter flips the object horizontally
STYLE="filter:FlipH"
For example:
Pressing the button below the text causes the following filter to be applied:
filter:FlipH
flipV
The FlipV
filter flips the object vertically
STYLE="filter:FlipV"
For example:
Pressing the button below the text causes the following filter to be applied:
filter:FlipV
glow
The Glow
filter adds radiance around the object, causing it to appear to glow.
STYLE="filter:Glow(Color=color, Strength=strength)"
#rrggbb
hex triplet for the colour of the glow
For example:
Pressing the button below the text causes the following filter to be applied:
filter : Glow(Color="#6699CC",Strength="5")
gray
The Gray
filter drops colour information from the object, rendering it in gray scales only.
STYLE="filter:Gray"
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Gray
invert
The Invert
filter reverses the hue, saturation and brightness of the object
STYLE="filter:Invert"
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Invert
light
The Light
filter can be used to make the object appear as if a light source is illuminating it. Initially, Light
filters need to be applied, then have the light source specified with one of the following methods.
AddAmbient(R,G,B,strength)
Adds an ambient light source to the image. Ambient light is non-directional and lights the entire area. The sun emits ambient light. The syntax is:
call object.style.filters.Light(n).addAmbient(R,G,B,strength)
where R
, G
and B
are values (0-255) to determine the ambient light colour and strength
determines the 'amount' of light cast.
AddCone(x1,y1,z1,x2,y2,R,G,B,strength,spread)
Adds a cone light source to the image. Cone light is directional and lights only a defined area. The syntax is:
call object.style.filters.Light(n).addCone(x1,y1,z1,x2,y2,R,G,B,strength,spread)
where x1
, y1
represent the location of the source light, x2
and y2
represent the location that the light is targeted towards, R
, G
and B
are values (0-255) to determine the light colour, strength
determines the 'amount' of light cast and spread
determines the angle of spread (0-90, in degrees).
AddPoint(x,y,z,R,G,B,strength)
Adds an point light source to the image. Point light is emitted by light bulbs. The syntax is:
call object.style.filters.Light(n).addPoint(x,y,z,R,G,B,strength)
where x
, y
and z
represent the point lights coordinates, R
, G
and B
are values (0-255) to determine the ambient light colour and strength
determines the 'amount' of light cast.
For example:
Pressing the button below the text causes the following script function to execute:
call document.all.divLight.filters.Light(0).addPoint(10,10,100,255,255,255,1000)
call divLight.filters.Light(0).addAmbient(0,0,255,50)
which adds a white point light and a blue ambient light to the text.
The following methods are also available for the Light Visual filter:
ChangeColor(lightnumber, r,g,b, fAbsolute)
The ChangeColor
method will change the colour of a light filter applied to an object. Use lightnumber
to identify the particular light source whose colour is to be changed (it's position in the Lights array), r,g and b, represent the new colour to be changed to and fAbsoloute
is a boolean flag. If fAbsoloute
is true (nonzero), then the referenced Light filter colour is changed to the new amount specified, if false (i.e. zero), then the referenced Light filter colour is changed by the specified amount.
ChangeStrength(lightnumber, strength, fAbsolute)
ChangeStrength
changes the strength of the particular Light filter (referenced by the lightnumber argument) to the strength specified in strength
if the fAbsolute
flag is true (nonzero), or by the amount specified if it's false (zero).
Clear
The Clear
method removes all light sources for the referenced Light filter.
MoveLight(lightnumber, x, y, z, fAbsolute)
The MoveLight
method moves the light source (for point lights), or the target location (for cone lights) and has no effect on ambient lights. The x
, y
and z
values represent positions to move the light to, either absolutely (fAbsoloute=nonzero
) or relatively (fAbsolute=false
).
mask
The Mask
filter takes all the transparent pixels in a visual object, sets them to a certain colour and creates a transparent mask from the nontransparent pixels. The syntax is:
STYLE="filter:Mask(Color=color)"
where Color
is the colour to be used for the mask.
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Mask (Color="#FFFFE0")
shadow
The shadow
filter can be used to apply a shadow to the specified object. The syntax is:
filter:Shadow(Color=color, Direction=direction)
#rrggbb
hex triplet that specifies the shadow colour
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Shadow (Color="#6699CC", Direction="135")
wave
The wave
causes sine wave distortion of the referenced object. The syntax is:
filter: Wave(Add=add, Freq=freq, LightStrength=strength, Phase=phase, Strength=strength)
For example:
Pressing the button below the image causes the following filter to be applied:
filter: wave(Add="0", Phase="4", Freq="5", LightStrength="5", Strength="2")
xray
The xray
filter causes the object to appear as if it had been x-rayed. The syntax is:
STYLE="filter:Xray"
For example:
Pressing the button below the image causes the following filter to be applied:
filter:Xray
Transition Filters
There are two types of transition filter supported by Internet Explorer 4.0, the Reveal Transition and the Blend Transition. As their names suggest, the Reveal Transition filter allows selective revealing of any visual object and the blend transition performs a fade in/out of a visual object.
RevealTrans Filter
The RevealTrans
filter can be applied to any visual object, to selectively show or hide it, using a variety of different techniques. The basic syntax is:
STYLE="filter: revealtrans(duration=duration, transition=transitionshape)
where Duration
is a time value that the transition will take. It accepts values in the format of seconds
.milliseconds
For example 2.1 = 2 seconds, 100 milliseconds. Transition
can be any one of the following:
Value | Description |
0 | Box in |
1 | Box out |
2 | Circle in |
3 | Circle out |
4 | Wipe up |
5 | Wipe down |
6 | Wipe right |
7 | Wipe left |
8 | Vertical blinds |
9 | Horizontal blinds |
10 | Checkerboard across |
11 | Checkerboard down |
12 | Random dissolve |
13 | Split vertical in |
14 | Split vertical out |
15 | Split horizontal in |
16 | Split horizontal out |
17 | Strips left down |
18 | Strips left up |
19 | Strips right down |
20 | Strips right up |
21 | Random bars horizontal |
22 | Random bars vertical |
23 | Random effect (any of the other 23) |
Note : The Reveal Transition Filter is most useful when used with the following events:
Apply
The Apply
method is used to actually apply the filter. Event though it may have been specified in the STYLE
attribute of the element, it still needs to be applied via the apply
method.
Play
The Play
method causes the referenced Reveal Transition filter to start playing. It starts the transition type, for the time specified in the Duration
attribute (if no Duration
argument is specified in the method. A Duration
can be specified in the Play
method, which will override any settings in the elements filter declaration.
Stop
The Stop
method is used to stop a transition and can be called at any time while the transition is playing. To determine whether the transition is playing, use the status
property (described below).
Properties
Reveal Transition filters have status and duration properties. The Duration
property reflects the current duration set for the filter and status
returns a value depending on the current status of the transition. "0" = transition stopped, "1" = transition applied, "2" = transition playing.
For example. Pressing the button below the (currently hidden) image below starts the random dissolve transition. The image is initially hidden, so that the filter is applied to dissolve the image into appearance, rather than dissolve it away.
The script function executed when the button is pressed is:
call logo.filters.item(0).Apply()
logo.style.visibility=""
call logo.filters.item(0).Play()
which applies the filter, then resets the images visibility before playing the dissolve transition.
BlendTrans Filter
The BlendTrans
filter can be applied to any visual object, to fade it in or out, over a certain time period. The basic syntax is:
STYLE="filter: blendtrans(duration=duration)"
where Duration
is a time value that the transition will take. It accepts values in the format of seconds
.milliseconds
For example 2.1 = 2 seconds, 100 milliseconds.
For example, below there is an image above the button that's not displayed yet. When the button is clicked, the following script function is executed:
call logo2.filters.item(0).Apply()
logo2.style.display="inline"
logo2.style.visibility=""
call logo2.filters.item(0).Play()
which applies the blendTrans
filter on the image, sets it to display as an 'in-line' element, makes it visible and finally, plays the transition (causing it to blend in over a 3 second period).
© 1995-1998, Stephen Le Hunte
file: /Techref/language/html/ib/dynamic_html/dfilt.htm, 29KB, , updated: 2004/3/1 16:47, local time: 2024/8/22 00:35,
3.129.73.56:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://piclist.com/tecHREF/language/html/ib/dynamic_html/dfilt.htm"> Visual Filters</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to piclist.com! |
.