please dont rip this site

Good Stepper Motors for the Linistepper


In general, the Linistepper will do best with low amperage, higher voltage motors. E.g. a 12 Volt, 1 Amp motor is better for the Lini than a 1 Volt, 12 Amp motor. Remember: only Unipolar (5 or more wires)!

Suggest a new motor for use with the Linistepper by filling out this form:

Printers / Copiers that have good motors in them:

Laserjet II and III printers (not the IIIsi, 4, or higher)

Also:

Lin Engineering 5618L-54

Lin Engineering 5718M-15-09

Lin Engineering 4118L-07

Anaheim Automation 23L004S-LW8

Kysan 57BYG070

Kysan 57BYGH211

Salem Controls SC23-57BYGH803

ORM 264K-2

Vexta PK266-02A

XUQUAN 23H256-30-6B

Sanyo Denki^ 103H546-0440

Sanyo Denki 103H7126-0941 (as found in Toshiba photocopiers; models: 7550, 6560, 6560, 5540.)

Sanyo Denki 103H7126-1441 (as found in Xerox XDL33D photocopier )

Shinano SST42D1040

Shinano SST42D1041

Shinano SST42D1020

Shinano SST42D1021

Shinano SST42D2040

Shinano SST42D2041

Shinano SST42D2030

Shinano SST42D2031

file: /techref/io/stepper/linistep/motors.htm, 1KB, , updated: 2009/11/2 13:03, local time: 2009/11/21 17:18,
TOP NEW HELP FIND: 
38.107.191.101:LOG IN
©2009 PLEASE DON'T RIP! DO: LINK / DIGG! / MAKE!
 ©2009 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it!
<A HREF="http://piclist.com/techref/io/stepper/linistep/motors.htm"> Good Stepper Motors for the Linistepper</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 
Stepper motors CAN be smooth!
And stepper controllers can be strong and cheap. Roman Black's Linistep stepper controller kits:
o 18th microstep
o Linear smoothing 		  o Open source
o Full kit $25!
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .